Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a plastic opening tool to pry the LCD connector from its connection on the logic board.
[* icon_caution] Be careful to onlyDo not pry up onagainst the large IC next to the connector, notor you may break it. Pry from the socket onside of the logic boardconnector as shown.
[* icon_caution] Be careful to onlyDo not pry up onagainst the large IC next to the connector, notor you may break it. Pry from the socket onside of the logic boardconnector as shown.