Wijzigingen aan stap #1
Bewerken voor tekjew —
Bewerking geweigerd door Scott Havard
- Voor
- Na
- Ongewijzigd
Stap regels
| [* icon_note] The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended. | |
| [* black] Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide. | |
| [* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener. | |
| [* icon_reminder] Place the iOpener over the front facing camera on the front edge of the top of the display. | |
| + | [* icon_note] ''iFixIt Full Assembly Fix Kits include the camera bracket premounted; it is not necessary to remove and reuse your old one.'' |