Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #24

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Lifticon_caution] Be very careful with this step. Take your time and ensure the front panel glass fromadhesive is hot and soft, and that you've been through all of the top, folding it upadhesive with an opening pick. Don't be afraid to stop and overreheat.
[* black] At
the iPad.
[* icon_caution] Do not remove
top of the front panel fromiPad opposite the rest ofhome button, you should have a pick lodged into each corner. Twist the iPad;picks to lift the digitizer cable still connectsglass slightly, separating the two.
[* icon_note
last of the adhesive along all four edges.
[* icon_caution
] If your digitizer is cracked and you do not wish to use it anymore, then cutencounter a significant amount of resistance, stop twisting. Leave the digitizer cablepicks in place, reheat, and reapply the iOpener to free some space to work upthe problem areas, and run a pick through the sticking point one more time.
[* black] Lifticon_caution] Be very careful with this step. Take your time and ensure the front panel glass fromadhesive is hot and soft, and that you've been through all of the top, folding it upadhesive with an opening pick. Don't be afraid to stop and overreheat.
[* black] At
the iPad.
[* icon_caution] Do not remove
top of the front panel fromiPad opposite the rest ofhome button, you should have a pick lodged into each corner. Twist the iPad;picks to lift the digitizer cable still connectsglass slightly, separating the two.
[* icon_note
last of the adhesive along all four edges.
[* icon_caution
] If your digitizer is cracked and you do not wish to use it anymore, then cutencounter a significant amount of resistance, stop twisting. Leave the digitizer cablepicks in place, reheat, and reapply the iOpener to free some space to work upthe problem areas, and run a pick through the sticking point one more time.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie