Wijzigingen aan stap #1
Bewerking door Peter Wilson —
Bewerking goedgekeurd door Andrew Optimus Goldheart
- Verwijderd
- Toegevoegd
- Ongewijzigd
Stap regels
[* icon_note] Gently fold the display over away from the rest of the iPod, taking care not to disconnect or break any of the ribbon cables. Set the two halves flat on a table or bench. |
[* black] Use a plastic opening tool to pry the home button switch up from the LCD plate. |
[* black] It may be necessary to use a heat gun or hair dryer to soften the adhesive on the back of the home button. Always use a low heat setting. |
[* icon_caution] Do not attempt to remove the home button switch, as it is connected to components below the LCD plate. |