Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Brady Cabe

Wachtend op goedkeuring


Stap regels

[* black] Lift the rear casing from your workspace, creating a 30 degree, or so, angle. I used 3 decks of playing cards to prop up the casing from my workspace.
[* black] Lift the main board from the rear casing at the bottom, making sure the volume dial clears the screw retainer post.
[* black] Once free, set the main board back down on the casing.
[* black] You are now free to desolder any of the contacts that need repair. In my situation, I will be examining the volume dial and will not need to desolder.
[* black] Good luck!