Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Brady Cabe

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] LiftCreate about a 30 degree angle between the rear casing fromand your workspace, creating a 30 degree, or so, anglelifting the casing by the top end. I used 3 decks of playing cards to prop up the casing from my workspace.
[* black] Lift the main board from the rear casing at the bottom, making sure the volume dial clears the screw retainer post. DO NOT COMPLETELY REMOVE MAIN BOARD!
[* black] LiftCreate about a 30 degree angle between the rear casing fromand your workspace, creating a 30 degree, or so, anglelifting the casing by the top end. I used 3 decks of playing cards to prop up the casing from my workspace.
[* black] Lift the main board from the rear casing at the bottom, making sure the volume dial clears the screw retainer post. DO NOT COMPLETELY REMOVE MAIN BOARD!
[* black] Once free, set the main board back down on the casing.
[* black] You are now free to desolder any of the contacts that need repair. In my situation, I will be examining the volume dial and will not need to desolder.
[* black] Good luck!

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd