Ga door naar hoofdinhoud

Wijzigingen in stap #5

Bewerken voor David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Pry lightly around the edge of the main board between the board and the casing to help free the board. Fingernails, a [product|IF145-002|spudger], or [product|IF145-000|iPodproduct|IF145-000|plastic opening tools] can be used for this task.
[* black] Pry lightly around the edge of the main board between the board and the casing to help free the board. Fingernails, a [product|IF145-002|spudger], or [product|IF145-000|iPodproduct|IF145-000|plastic opening tools] can be used for this task.
[* black] DO NOT TRY TO REMOVE THE MAIN BOARD COMPLETELY!!! There are soldered items that need to be dealt with. Follow along closely.
[* black] Gently, and I mean gently, pull up on the LED assembly to loosen the main board from the rear casing.
[* black] Any resistance should indicate that the board needs to be loosened from the casing, around the edges, more before proceeding.