Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Brady Cabe

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] CAUTION: Do not yank the casing apart!!!
[* black] Gently pry from the bottom and work a finger upalong the side and theuntil monitor will poppops in half.
[* black] Gently pry from the bottom and work a finger upalong the side and theuntil monitor will poppops in half.
[* black] The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.
[* black] Lay the two halves as shown.