Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Justin Ogihara

Bewerking goedgekeurd door Justin Ogihara

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Using the Phillips #0, unscrew 2two 3mm screws holding the fan in place and disconnect the cable connecting it to the motherboard. There is an adhesive tab holding the hard drive cable in place up against the fan; remove this as well.
[* red] Using the Phillips #0, unscrew 2two 3mm screws holding the fan in place and disconnect the cable connecting it to the motherboard. There is an adhesive tab holding the hard drive cable in place up against the fan; remove this as well.