Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Jasper Fleischhauer

Bewerking goedgekeurd door Jasper Fleischhauer

Voor
Na
Ongewijzigd

Stap regels

[* black] Lay the iOpener clear-side down, flat on the edge of the device, over an adhesive seal you wish to heat. The liquid will flatten the iOpener against the surface, ensuring good heat conduction.
[* black] Let the bag sit on the device for approximately 90 seconds before attempting to open the front panel.
[* black] At this point you should be able to begin prying under the screen with a plastic opening tool. Be sure to see your device's [[Topic:iPad|specific guide]] for where and how to do this.
[* icon_caution] Throughout the procedure you will need to reheat the iOpener. To prevent overheating the iOpener, always wait until the iOpener has cooled enough to touch safely. ( Do not microwave the iOpener for more than thirty seconds at a time.
[* icon_caution] Throughout the procedure you will need to reheat the iOpener. To prevent overheating the iOpener, always wait until the iOpener has cooled enough to touch safely. ( Do not microwave the iOpener for more than thirty seconds at a time.