Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Lay the iOpener clear-side down, flat on the edge of the device, over an adhesive seal you wish to heat. SmoothThe liquid will flatten the iOpener alongagainst the surface to ensuresurface, ensuring good contact with the deviceheat conduction.
[* black] Lay the iOpener clear-side down, flat on the edge of the device, over an adhesive seal you wish to heat. SmoothThe liquid will flatten the iOpener alongagainst the surface to ensuresurface, ensuring good contact with the deviceheat conduction.
[* black] Let the bag sit on the device for approximately 90 seconds before attempting to open the front panel.
[* black] At this point you should be able to begin prying under the screen with a plastic opening tool. Be sure to see your device's [[Topic:iPad|specific guide]] for where and how to do this.
[* icon_caution] Throughout the procedure you maywill need to reheat the iOpener. To prevent overheating the iOpener, always wait at least two minutes before microwaving again. Do not microwave the iOpener for more than one minutethirty seconds at a time.
[* icon_caution] Throughout the procedure you maywill need to reheat the iOpener. To prevent overheating the iOpener, always wait at least two minutes before microwaving again. Do not microwave the iOpener for more than one minutethirty seconds at a time.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd