Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor mashton27

Bewerking goedgekeurd door mashton27

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Place the plastic opening tool between the plastic cover and the mount on the printer.
[* black] Pry the plastic cover towards the center of the printer.
[* black] Pull up on the cover to remove it from the printerprinter-as shown.
[* black] Do this for both sides ofRepeat process on the cover.
[* black] Show pulling the lid off
other side.
[* black] Pull up on the cover to remove it from the printerprinter-as shown.
[* black] Do this for both sides ofRepeat process on the cover.
[* black] Show pulling the lid off
other side.