Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Daniel

Bewerking goedgekeurd door Daniel

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] With your other hand, slide the top of the panel towards the back of the printer.
[* icon_caution] Do not rip the white ribboncable that connects the panel with the main body of the printer.
[* icon_caution] Do not rip the white ribboncable that connects the panel with the main body of the printer.
[* red] Disconnect the ribbon by pinching the blue tab and pulling away from the green circuit board.
[* black] Lift the panel free and set to the side.