Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Christopher Bruni

Bewerking goedgekeurd door Christopher Bruni

Voor
Na
Ongewijzigd

Stap regels

-[* black] Unplug the power button connector by pinching the tab on the front and pulling directly upwards.
+[* red] Unplug the power button connector by pinching the tab on the front and pulling directly upwards.
[* black] Pull the cable through the center section of the hoverboard.
-[* icon_reminder] For reassembly you will have to feed the cable back through the center section. This can be done using a ridged wire or cable as a guide.
+[* icon_reminder] For reassembly, you will have to feed the cable back through the center section. This can be done using a ridged wire or cable.