Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Ryan Whitlock

Bewerking goedgekeurd door Ryan Whitlock

Voor
Na
Ongewijzigd

Stap regels

[* black] Use your screwdriver to remove five 9mm Phillips #1 screws from the end cap opposite to the USB port.
[* black] Pull this end cap off with your hands.
[* black] Use your screwdriver to remove two 11mm Phillips #1 screws on the battery cover.
[* black] Pull the battery cover off with your hands.
[* black] Use your hands to remove the large white plug that connects the wires from the battery to the main board.
[* black] Pull the battery out with your hands.