Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Sank Yang

Bewerking goedgekeurd door Sank Yang

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Follow these steps in reverse orderWedge the new spark plugs into a 5/8'' spark plug socket.
[* black] Place the spark plug into the cylinder using the socket and hand tighten the spark plugs as much as possible.
[* black] Tighten the spark plugs
to reassemble13 ft-lbs with a torque wrench.
[* black] Follow these steps in reverse orderWedge the new spark plugs into a 5/8'' spark plug socket.
[* black] Place the spark plug into the cylinder using the socket and hand tighten the spark plugs as much as possible.
[* black] Tighten the spark plugs
to reassemble13 ft-lbs with a torque wrench.
[* icon_caution] Warning: do not over tighten spark plugs, this could strip out the threaded holes in the block.

Afbeelding 1

Oude versie

Nieuwe versie