Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Jacob

Bewerking goedgekeurd door Jacob

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] Be very gentle with the ZIF connector! It is designed to be locked into the motherboard, so make sure you lift the retaining latch before attempting to disconnect it.
[* red] Lift the latch on the ZIF (zero insertion-force) connector using a plastic opening tool. The ZIF connector is located on the motherboard and is connected to the keyboard through the ribbon cable.
[* black] Disconnect the ribbon cable from the ZIF connector on the motherboard by lifting it up and out; this completely removes the keyboard.
[* icon_caution] Be very gentle with the ZIF connector! It is designed to be locked into the motherboard, so make sure you lift the retaining latch before attempting to disconnect it.