Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd

Stap regels

+[* icon_note] If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around.
[* black] Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.
-[* black] If you are following this guide for the charge port replacement ONLY. You do NOT need to disconnect or remove the antenna cable from the housing. Leave this cable connected and place the bottom part of this cable and speaker out of the way of the way during the rest of the repair.