Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Austin Culberson

Bewerking goedgekeurd door Austin Culberson

Voor
Na
Ongewijzigd

Stap regels

[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudge, loosen the metal cover by prying it away from the six small plastic tabs.
[*
black] Insert wisdom hereRemove the metal cover.
[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudge, loosen the metal cover by prying it away from the six small plastic tabs.
[*
black] Insert wisdom hereRemove the metal cover.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie