Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Jared Stine

Bewerking goedgekeurd door Jared Stine

Voor
Na
Ongewijzigd

Stap regels

[* black] Set you small metal can into your work area and pour some cleaning solvent into the can.
[* icon_note] A recommended solvent to use can be carburetor cleaner or Gumout. Do not use WD-40 as this chemical has negative effects on bearings.
[* icon_caution] Be careful when using these harsh solvents and avoid skin or eye contact. Make sure you follow the safety procedures outlined by the solvent manufacturer as well.