Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Jared Stine

Bewerking goedgekeurd door Jared Stine

Voor
Na
Ongewijzigd

Stap regels

[* black] Use wrench and slowly tighten the nut until it is about half a turn from touching the wheel.
-[* icon_note] Be careful not to cross-thread the axle nut. If turns become too difficult, you may need to loosen the bolt to straighten it and then proceed with tightening.
+[* icon_note] Be careful not to cross-thread the axle nut. If turns become too difficult, you may need to unthread the nut to straighten it and then proceed with tightening.