Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Daniel

Bewerking goedgekeurd door Daniel

Voor
Na
Ongewijzigd

Stap regels

-[* black] To insert bearings, simply center them over the existing opening and firmly press until they are completely inside the wheel and touching the very middle of the wheel. There is one bearing in each side of the wheel.
-[* black] Removal of the bearings consists of carefully prying them out with a screwdriver in a circular pattern.
+[* black] To remove existing wheels and bearings from your trucks follow this process for each wheel. If no wheels are currently on your trucks please proceed to step 3.
+[* black] First remove the axel nut at the center of the wheel with either a skate tool, socket wrench, or monkey wrench that fits the nut.