Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor David Sylvester

Bewerking goedgekeurd door David Sylvester

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Carefully pull the board to expose the two cables that connect to the back of the board.
[* red] Use pliers and tweezers to disconnect the ribbon cable by pulling it straight out of its socket and the data connector from theby holding its tab and pulling it straight back offrom the board.
[* icon_noteicon_caution] Do not let the ribbon cable recede into the light engine.
[* red] Use pliers and tweezers to disconnect the ribbon cable by pulling it straight out of its socket and the data connector from theby holding its tab and pulling it straight back offrom the board.
[* icon_noteicon_caution] Do not let the ribbon cable recede into the light engine.