Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor David Sylvester

Bewerking goedgekeurd door David Sylvester

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Use pliers to remove the two securing bolts from above and below the data portport by rotating counterclockwise.
[* orange] Remove the seven 8mm phillips8 mm Phillips #0 screws holding the plate to the light engine board.
[* black] Gently hold each side of the metal frame and pull it straight back to reveal the board and heat sinks underneath.
[* red] Use pliers to remove the two securing bolts from above and below the data portport by rotating counterclockwise.
[* orange] Remove the seven 8mm phillips8 mm Phillips #0 screws holding the plate to the light engine board.
[* black] Gently hold each side of the metal frame and pull it straight back to reveal the board and heat sinks underneath.