Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #10

Bewerking door Pavel Hanak

Bewerking goedgekeurd door Pavel Hanak

Voor
Na
Ongewijzigd

Stap regels

[title] Setting up BIOS part 1
[* black] You need to change some settings in the BIOS, otherwise the printer firmware will always freeze as soon as you plug in the Ethernet cable. Specifically, you need to disable some onboard devices to prevent IRQ conflicts (the printer firmware runs on FreeDOSFreeDOS, which is not Plug and Play OS).
[* black] You need to change some settings in the BIOS, otherwise the printer firmware will always freeze as soon as you plug in the Ethernet cable. Specifically, you need to disable some onboard devices to prevent IRQ conflicts (the printer firmware runs on FreeDOSFreeDOS, which is not Plug and Play OS).
[* black] Unfortunately, I don't remember which settings exactly have to be changed, but I made photos on a working printer, so you can use them as a guide.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie