Wijzigingen aan stap #9
Stap regels
| + | [title] Remove vibrator, front speaker, and front camera. |
|---|---|
| + | [* black] Remove the vibrator. ++Use a flat pry tool to gently remove the round vibrator. There is adhesive holding the vibrator and a small amount is needed to pry it from its location. ++ Then reassemble on the new digitizer. |
| + | [* black] Remove the speaker from its housing on the top middle of digitizer. ++Use a pair of tweezers to gently remove the speaker. ++ Once removed reassemble on the new digitizer. |
| + | [* black] Remove the front facing camera. ++Use a pair of tweezers or gently pull up on the front camera. Note there is an adhesive ring holding the camera in place. Also remove this ring for reassembly.++ Once removed place the ring in the new digitizer and reassemble the front facing camera. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd