Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #4

Bewerking door Bas Ovink

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] Rotate the mini so that the SuperDrive slot loading mechanism is facing you.
[* black] Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.
[* icon_caution] Use tweezers to grab the connector (as seen in the picture), '''not the wires'''. To prevent tearing the wires you can also wiggle a screwdriver inbetween the connector and its socket.
[* icon_caution] Use tweezers to grab the connector (as seen in the picture), '''not the wires'''. To prevent tearing the wires you can also wiggle a screwdriver inbetween the connector and its socket.
[* icon_note] The connector is located under the optical drive opening, next to the PRAM battery.