Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following ten screws:
[* red] Eight 7.8 mm T10T8 Torx.
[* orange] Two 6.1 mm T10T8 Torx.
[* red] Eight 7.8 mm T10T8 Torx.
[* orange] Two 6.1 mm T10T8 Torx.
[* red] If the eight screws around the processors refuse to unscrew, use a Phillips screwdriver to hold the lug from the one side of the board while you remove the Torx screw from the other side.