Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Brett

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Lift the hard drive from its left edge enough to clear the inverter and pull it toward the left edge of your iMac to unseat the mounting pins from the chassis.
+[* black] Lift the hard drive from its left edge enough to clear the inverter and pull it toward the left edge of your iMac to unseat the mounting pins from the chassis. Some drives will have a strip of metallic tape connecting the right side if the drive to the metal grid. Gently peel from the drive prior to removal.
[* icon_reminder] During installation, do not push the rubber grommets through the chassis with the hard drive mounting pins as retrieving them will require removing the logic board.