Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Disconnect the white antenna cable.
[* black] Carefully pry the daughterboardcharging assembly out and remove it from the device.
[* icon_caution] The boardassembly is glued to the case so go slowly and be careful not to tear any cables. If the boardassembly does not come out easily, try heating the case where the board is glued.
[* black] Carefully pry the daughterboardcharging assembly out and remove it from the device.
[* icon_caution] The boardassembly is glued to the case so go slowly and be careful not to tear any cables. If the boardassembly does not come out easily, try heating the case where the board is glued.