Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Disconnect the white antenna cable.
[*
black] Carefully pryUse the charging assembly out and remove it from the device.
[* icon_caution] The assembly is glued
point of a spudger to disconnect the case so go slowly and be careful notwhite antenna cable to tear any cables. If the assembly does not come out easily, try heating the case whereright of the board is gluedbattery.
[* red] Disconnect the white antenna cable.
[*
black] Carefully pryUse the charging assembly out and remove it from the device.
[* icon_caution] The assembly is glued
point of a spudger to disconnect the case so go slowly and be careful notwhite antenna cable to tear any cables. If the assembly does not come out easily, try heating the case whereright of the board is gluedbattery.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Verwijderd