Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] The battery is held down by a large orange ribbon. Simply disconnect the metal tab that attatches the ribbon to the phone.
[* black] Pry apart and remove the battery from the device using a spudger.
[* icon_cautionicon_note] The battery will be glued to the bottom. Removing it will not damage the device, but it will be difficult.
[* icon_reminder] To install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery.
[* black] Press the battery firmly into place for 5-10 seconds.
[* icon_cautionicon_note] The battery will be glued to the bottom. Removing it will not damage the device, but it will be difficult.
[* icon_reminder] To install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery.
[* black] Press the battery firmly into place for 5-10 seconds.