Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] The battery is held down by a large orange ribbon. Simply disconnectblack] If available, apply some isopropyl alcohol under each corner of the metal tab that attatches the ribbonbattery and allow it to penetrate for several minutes to help weaken the phoneadhesive.
[* black] Pry apart and remove the battery from the device usingAlternatively, apply a spudger.
[* icon_note] The battery will be glued
[guide|11677|heated iOpener|new_window=true] to the bottom. Removing it will not damageback of the device, but it will be difficult.
[* icon_reminder] To install a new battery:
[* black] Remove any remaining adhesive from
phone over the phone,battery for at least two minutes. Reheat and cleanreapply the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure
iOpener as needed until the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery.
[* black] Press the battery firmly into place for 5-10 seconds
is sufficiently weakened.
[* red] The battery is held down by a large orange ribbon. Simply disconnectblack] If available, apply some isopropyl alcohol under each corner of the metal tab that attatches the ribbonbattery and allow it to penetrate for several minutes to help weaken the phoneadhesive.
[* black] Pry apart and remove the battery from the device usingAlternatively, apply a spudger.
[* icon_note] The battery will be glued
[guide|11677|heated iOpener|new_window=true] to the bottom. Removing it will not damageback of the device, but it will be difficult.
[* icon_reminder] To install a new battery:
[* black] Remove any remaining adhesive from
phone over the phone,battery for at least two minutes. Reheat and cleanreapply the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure
iOpener as needed until the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery.
[* black] Press the battery firmly into place for 5-10 seconds
is sufficiently weakened.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Verwijderd

Afbeelding 3

Verwijderd