Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Wijzigingen aan stap #18

Bewerking door Brett Hartt

Bewerking goedgekeurd door Brett Hartt

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert wisdom hereSlide the guitar pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.
[* black] The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.
[* icon_note] If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.
[* icon_reminder] If the guitar pick is getting stuck in the adhesive, "roll" the guitar pick as shown in [guide|10808|step 9|stepid=38829]
.
[* black] Insert wisdom hereSlide the guitar pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.
[* black] The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.
[* icon_note] If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.
[* icon_reminder] If the guitar pick is getting stuck in the adhesive, "roll" the guitar pick as shown in [guide|10808|step 9|stepid=38829]
.