Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd

Stap regels

[* black] Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.
[* icon_caution] To avoid damaging your iPad, pry only on the connectors themselves, ***not*** on the socket on the logic board.
+[* icon_reminder] During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.