Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Push the PRAM battery intoward the center of the logic board and pull it upup out of its holder. You'll have to push the battery in further than you'd expect in order to get it to pop free.
[* icon_caution] Don't bend the metal finger too much or it will break off, requiring a new logic board.
[* black] Push the PRAM battery intoward the center of the logic board and pull it upup out of its holder. You'll have to push the battery in further than you'd expect in order to get it to pop free.
[* icon_caution] Don't bend the metal finger too much or it will break off, requiring a new logic board.
[* icon_reminder] When inserting the new battery, make sure the side with writing along the edges faces the black plastic holder. You should also insure that the metal connectors make contact with the battery (you can bend them forward if they do not).