Ga door naar hoofdinhoud

Wijzigingen aan stap #11

Bewerking door Josh

Bewerking goedgekeurd door Andrew Optimus Goldheart


Stap regels

[* black] Rotate the logic board assembly toward the battery side of the rear case.
[* icon_caution] Do not attempt to completely remove the logic board assembly from the rear case, yet; there is still one cable connected to the underside of the logic board.
[* red] The flash surround is adhered to the flash unit and the rear case. If it stays on the rear case remove with tweezers and mount it back on the flash unit.
+[* black] ''Note: when reassembling your device, be sure that the lower interconnect cable is not tucked underneath the logic board.''