Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #11

Bewerken voor charles morales —

Bewerking geweigerd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Rotate the logic board assembly toward the battery side of the rear case.
[* icon_caution] Do not attempt to completely remove the logic board assembly from the rear case, yet; there is still one cable connected to the underside of the logic board.
-[* red] The flash surround is adhered to the flash unit and the rear case. If it stays on the rear case remove with tweezers and mount it back on the flash unit.
+[* red] The flash difuser stays in the frame, leave it. You risk damaging it and also making the reinstall of the logic board more difficult. if everything is properly re-assembled, the flash module will line back up with the difuser.