Ga door naar hoofdinhoud

Wijzigingen aan stap #10

Bewerken voor Oria

Bewerking geweigerd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.3 mm Phillips screws
[* orange] Three 2.7 mm standoff screws
[* icon_note] These screws have a Phillips bit pattern, but we found the best removal tool to be a 2.5 mm flathead driver.
+ [* icon_caution] Make sure that you unplug the dock connector flex from his socket