Wijzigingen aan stap #10
Bewerken voor Walter Galan —
Bewerking goedgekeurd door Walter Galan
- Voor
- Na
- Ongewijzigd
Stap regels
[* black] Remove the following screws securing the logic board to the rear case: | |
[* red] Two 2.3 mm Phillips screws | |
[* orange] Three 2.7 mm standoff screws | |
- | |
+ | [* icon_note] These screws have a Phillips bit pattern, but we found the best tool to be a 2.5 mm flathead driver. |