Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #1

Bewerken voor Demari Hackett —

Bewerking goedgekeurd door Demari Hackett

Voor
Na
Ongewijzigd

Stap regels

-[* red] Use Phillips 0 Screwdriver to remove two (2) 10 mm rear screws.
-[* orange] Use a plastic prying tool to help separate the top plastic casing from the bottom metal casing.
-[* icon_caution] When opening the device, pay attention to the ribbon cable circled in image 3.
+[* red] Use Phillips 0 Screwdriver to remove two (2), 10 mm rear screws.
+[* orange] Use the iFixit opening tool to help separate the top plastic casing from the bottom metal casing.
+[* icon_caution] When opening the device, be careful to not damage the ribbon cable circled in image 3.