Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerken voor Jason Vo

Bewerking goedgekeurd door Jason Vo

Voor
Na
Ongewijzigd

Stap regels

-[* red] Remove the six 12mm screws at the bottom panel with a Tri-wing Y1 screwdriver.
+[* red] Remove the six 12mm screws located at both the battery area and the bottom panel, with a Tri-wing Y1 screwdriver.
[* black] Slide the bottom panel down and lift it up to remove.
-[* orange] Remove the seven 5.5mm screws located on the hard drive case using a Tri-wing Y1 screwdriver.
+[* orange] Remove the seven 5.5mm screws located at the bottom area with a Tri-wing Y1 screwdriver.