Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

-[* black] Press down firmly with your finger and hold tightly for 30 seconds. This will set the pressure sensitive adhesive.
+[* black] Press the new foot down firmly with your finger and maintain pressure for 30 seconds to set the pressure sensitive adhesive.
+[* black] Repeat the last seven steps for each of the four feet.
+[* icon_reminder] Reassemble the lower case using the new set of screws. These have thread locker pre-applied and should stay put longer than the original screws.