Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

-[* black] Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
+[* black] Use a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
[* black] Pull the connector away from its socket on the logic board.
[* icon_caution] Do not lift the cable upward as you disconnect it.