Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Travers Edwards

Bewerking goedgekeurd door Lexa Hall

Voor
Na
Ongewijzigd

Stap regels

-[* black] Pry the speaker cable connector straight up from its socket on the logic board.
+[* black] Place the prying tool beneath the 4 wires on the end of the connector and gently pry the speaker cable connector straight up from its socket on the logic board. ++Do not pry from the opposite end of the connector as this will break the 4 solder points on the underside of the socket and will require a microsolder repair.++