Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
[*
black] Insert wisdom herean opening pick into the gap.
[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool
.
[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
[*
black] Insert wisdom herean opening pick into the gap.
[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool
.