Ga door naar hoofdinhoud

Wijzigingen aan stap #18

Bewerking door Jake Devincenzi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Lift the logic board out of the rear case, minding any cables that may get caught. If the front edge of the logic board, under the RAM sockets, won't pull up, it's sticking on the three plastic mounting pins in the rear housing under this edge. Use either your fingernails, or a spudger, under the front edge of the RAM sockets to gently push up on this edge until it clears these mounting pins.
+[* black] Lift the logic board out of the rear case, minding any cables that may get caught.
+[* icon_note] If the front edge of the logic board, under the RAM sockets, won't pull up, it's sticking on the three plastic mounting pins in the rear housing under this edge. Use a spudger under the front edge of the RAM sockets to gently push up on this edge until it clears these mounting pins.