Ga door naar hoofdinhoud

Wijzigingen aan stap #14

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Lift the microphone cable connector straight up out of its socket on the audio board.
-[* icon_note] ***QUALITY TIP*** During re-installation ensure that the mic cable runs between the ODD fan and the board support. If the cable runs on the wrong side of the support, the cable will be too short to plug in.
+[* icon_note] During reinstallation, ensure that the mic cable runs between the ODD fan and the board support. If the cable runs on the wrong side of the support, the cable will be too short to plug in.