Wijzigingen aan stap #1
Bewerken voor Darrin Smiley —
Bewerking goedgekeurd door Darrin Smiley
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Carefully, pull back the locking clip of the connector (attaching the touchpad to motherboard) using a plastic opening tool and disconnect cable. | |
| [* red] Using a PH0 bit remove the 7 (2.8 mm) screws securing the touchpad to the device. | |
| [* icon_note] Keep the cable from interfering with the touchpad removal. | |
| - | [* black] Use a plastic opening tool to pry up the touchpad. |