Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #2

Bewerken voor Chris Gifford —

Bewerking goedgekeurd door Chris Gifford

Voor
Na
Ongewijzigd

Stap regels

-[* red] Using a Phillips Head #1 screwdriver, unscrew the 15 screws on the bottom of the device.
-[* black] After all the screws are unscrewed, remove the bottom plate.
-[* icon_note] Keep track of all the screws and which slot they came from, as they slightly differ. We recommend laying out on a piece of paper, in a way that if the paper was the device the screws would be where they would properly go.
+[* red] Using a Phillips Head #1 screwdriver, unscrew the 15 screws on the bottom of the device
+[* black] After all the screws are unscrewed, remove the bottom plate
+[* icon_note] Keep track of all the screws and which slot they came from, as they slightly differ. We recommend this system: lay out on a piece of paper and pretending the paper is the device. Place the screws on the paper approximately where they would go.